Home :: Vision Products :: Vision Vamo V2 Variable Voltage Mod Gun Metal

Vision Vamo V2 Variable Voltage Mod Gun Metal

Vision Vamo V2 Variable Voltage Mod Gun Metal
Vision Vamo Variable Voltage Mod Gun Metal (Mod Only)

This is the Vamo VV mod from Vision. The Vision Variable Volt Mod has multiple configurations available giving a large amount of functionality and flexibility. With a chrome finish, the Vision Variable Volt Mod is comfortable to hold and easy to use. The Vision Variable Volt Mod can show battery volts and atomizer/cartomizer ohms. It has a 5 Click on/off feature. With a sealed 510 recessed eGo connector.

Vision Vamo VV Mod instructions:

1. Click the biggest button 5 times, the light will flicker, start to work.
2. Keep pressing the “-”button more than 3 sec, the LCD screen displays the battery voltage. Then reduce voltage by pressing – button, increase voltage by pressing “+” button. The voltage will increase or reduce with 0.1v standard when you adjust. Vapor will be the least once the voltage is 3.0v, and it will be the largest once the voltage is 6.0v.
3. Keep pressing the + button more than 3sec, LCD screen display the present working resistance.
4. When the control panel is switched, keep pressing"+"and"-" at the same time for 5 seconds, The LCD screen display the working power. At this time, adjusting the working power 0.5W each time by pressing "+"and"-" buttons (3.0-15W)
5. Press the biggest button while the product is working.
6.“off”, click the biggest button and hold for 5 times, it stop working.
7. Battery monitoring shuts the unit off once battery has reached end of charge.
8. when end of charge, take out the battery, then charge.
9. LCD displays “LO-Ω” if resistance lower than 1.2ohm, “LO-V” if short circuit
10. Keep Pressing"-" for 10 seconds, the LCD screen displays "n01", it is AVG mode, or displays "n02", it is RMS mode.
11. If using one 18350 battery, when the remaining voltage is under 3.2v, the LCD screen displays "LO", if using 2pcs 18350batteries, when the remaining voltage is under 6.4v, the LCD screen displays "LO"
12. Try to use 2pcs 18350 together, they will make the Vamo work the best!
SKU 11059  
 
Our price: $49.99
Quantity (8 available)   
Product Review There are no video product reviews at this time.

: *
: *
: *
 
EVOD 2 / ProTank III / AeroTank Replacement Coil 2.0ohm DC (5 Pack)
Mitten Juice
KVS eGo Starter Zip Kit 650mah Single Battery
EVOD 2 / ProTank III / AeroTank Replacement Coil 2.0ohm DC (5 Pack) Mitten Juice KVS eGo Starter Zip Kit 650mah Single Battery
$14.99
$6.00
$22.99
 
Mad Hatter Smooth
Innokin iClear 30S Replacement Coil 2.2ohm
Kanger ProTank II Replacement Glass Clear
Mad Hatter Smooth Innokin iClear 30S Replacement Coil 2.2ohm Kanger ProTank II Replacement Glass Clear
$6.00
$4.49
$2.99
 
KVS 510 Transparent Drip Tips Colors
Innokin iClear30 1.8ohm DC Clear
Kanger EVOD 1000mAh Battery Purple
KVS 510 Transparent Drip Tips Colors Innokin iClear30 1.8ohm DC Clear Kanger EVOD 1000mAh Battery Purple
$2.99
$12.99
$17.99

Customer Reviews

There have been no reviews for this product.

Add your review here

: *
: *
Type the characters you see in the picture:


*

Follow Kalamazoo Vapor Shop On Twitter!